how do i comfigure a hot firm drive within a computer?

how do i comfigure a hot firm drive within a computer?

Connect your up to date hard drive as slave. See the jersey settings on the hard drive. Check within BIOS whether it has detected foreign hard drive or not. Download the software Partition Magic from ineternet and install.Create the divider using the software. There are several other soft available on net. Just google.
try checking next to the hard drive maker site

I could tell ya but you did'nt include much info, do ya anticipate as a main drive or as a slave
There is a ''master/slave'' setting at the rear legs of your hard drive,check if the elderly hard drive is set to master,if that is to say the case set the investigational hard drive to slave.At the vertebrae of your hard drive you will see a nice of plastic stuff known as jersey,you will have to set it.If your intricate drive is not a( SATA)you will need to connect the IDE ribborn cable - formulate sure the red stride correspond to pin one at the back of your tricky drive.

The manual documentation that come with your complicated drive will instruct you on what to do.Please do not ignore the instruction because it is critical to a proper installation